FAQ – DAKOTA 3D

[:fr]

Pour télécharger et visualiser les documents ci-dessous vous devez impérativement être connecté [:en]

To download and view the documents below you must be logged in

[:de]

To download and view the documents below you must be logged in

[:]
How to wire an S3 series laser?
    Replacing the V2 series laser with the S3 series laser requires a wiring change.

  • DAK_NOTE_007E - RevB - Laser wiring
How to change a laser?
    2 essential procedures for changing a laser: prerequisites and replacement.

  • DAK_NOTE_006BisF - RevA - Laser Replacement - Prerequisites
  • DAK_NOTE_006E - RevB - Laser replacement
How to replace a camera?
    A document is available for download below. It describes the complete procedure for replacing a C5-type camera.

  • DAK_NOTE_015E - RevB - Camera replacement
Regular cleaning
    The downloadable document describes the benefits of regular window cleaning.

  • DAK_NOTE_025E - RevA
How to replace the cable inside the module?
    Replacement of the multi-cable inside the 3D module. This involves replacing the cable mounted on a Harting socket and consisting of the camera power cable, the camera data cable and the laser power cable. Note: Such a cable is a spare part.

  • DAK_NOTE_021E-RevA - Module Cable Replacement
How to create a new reference?
    Creating a new reference in the database requires a number of actions: creating the reference name, saving images for this reference, choosing the model image, etc. The associated note describes the procedure for creating a new reference in the Dakota application.

  • DAK_NOTE_004E - RevA - NewReference
Clip tool
    Clip-specific tool

  • DAK_NOTE_010E - RevB - Clip tool
Change directory
    It is possible to change the path where images are saved (or read) via the Dakota application (while remaining in production mode).

  • DAK_NOTE_018E - RevA - Change Images Drive
Backup
    It is important to have a backup of the main elements that define the system, namely the database, the application and the configuration settings. A note is available for download. It describes this backup in detail.

  • DAK_NOTE_031E-RevA-Backup
Configurable communication file
    As communication can be parameterised, a document describes the different parameters of this file.

  • DAK_NOTE_020E - Draft
How to adjust additional screens?
    It is possible to add screens, often positioned in the insertion area in order to view the results from the previous run. To set up these screens, parameters must be configured in the Dakota application. The note available for download describes these settings.

  • DAK_NOTE_017E - RevB - Additional Screens
"Acquisition issue - Trigger signal"
    The "trigger" signal may be the source of an acquisition issue.

  • DAK_NOTE_022E - RevA - Trigger signal
  • DAK_NOTE_020E-Draft
How to replace a shutter?
    Procedure for replacing a shutter

  • DAK_NOTE_011E - RevA - Shutter replacement
"Acquisition issue - Encoder signal"
    The encoder may be the source of an acquisition issue. If the encoder does not emit enough pulses when passing in front of the vision system, acquisition quality will be poor.

  • DAK_NOTE_023E - RevA - Encoder checking
How to disable driver signature enforcement?
    This document addresses the driver signature issue (useful for certain boards: I/O, communication, etc.).

  • Disabling driver signature enforcement: DAK_NOTE_013E - RevB - Disable driver signature
Test the Profinet card installation
    Test for Profinet card operation

  • DAK_NOTE_014E - RevB - Profinet card test
Setting up a communication simulator
    If communication between Dakota and the PLC is not accessible, there is a mode in the Dakota application that allows it to be simulated.

  • DAK_NOTE_016E - RevA - Communication simulator